Infomer Set Top Box Password and Login Id Updated FREE
Infomer Set Top Box Password and Login Id
Accessing System settings
System Settings carte consists of main STB settings. Options for accessing System settings:
- With Remote Control: Setup button*.
- In Embedded portal: Main menu ⇒ Settings ⇒ System settings.
- In Select a portal for loading window ⇒ Organization settings (this choice tin can be useful to change settings immediately before portal loading in STB).
*Services or Gear up buttons can be used in erstwhile RC models.
Listing of system settings
- Network
- Servers
- Video
- Sound
- Advanced settings
- Keyboard layout
- Network Info
- Device info
- Restart portal
- Reboot device
- Reset settings
- Clear user data
- Software update
- Remote command
Network
This section of Arrangement settings contains STB network connections.
Network Connection Type
The Network section contains STB network connections settings. The post-obit network connection options may be displayed:
- Wired (Ethernet) - connexion via Ethernet port STB. Used shielded or unshieldedCat5,Cat5e,Cat6 orCat6A cables using8P8C (RJ-45)modular connectors with straight-through or cross-over wiring. Network type - Ethernet, physical layer standards - 10BASE-T, 100BASE-T(10).
- PPPoE - connection using PPPoE network protocol (Point-to-Point Protocol over Ethernet). The blazon of concrete layer standards is identical to Wired (Ethernet).
- Wireless (Wi-Fi) - connection over Wi-Fi radio link. Built-in Wi-Fi-module or external Wi-Fi adapter (via USB) is used for STB connectedness to Wi-Fi access point . See clarification in WiFi wireless access.
- Bluetooth - wireless Bluetooth connexion to auxiliary devices similar sound receivers and input devices. See description in Connecting Bluetooth devices.
Network connexion parameters
The next network parameters might exist assigned (obtained automatically from DHCP-server or specified manually) to every network interface of STB (wired Ethernet or wireless Wi-Fi):
- IP address (ipaddr_conf)* - IP accost assigned to network interface;
- Mask (netmask)* - subnet mask assigned to network interface;
- Gateway (gatewayip)* - IP accost of Default gateway ;
- DNS (dnsip)* - IP address of DNS (Domain Name System) server;
In addition, wireless Wi-Fi interface uses the next parameters:
- SSID (wifi_ssid)* - westwardireless LAN identifier (Service Ready identifier);
- Authentication mode (wifi_auth)* - w ireless security / authentication standards (WPA , WPA2, etc.);
- Encryption (wifi_enc)* - w ireless encryption standards (WEP, AES, etc.);
- Key or passphrase (wifi_psk)* - password to accessing due west ireless LAN.
* -the respective value of environment variable is shown in brackets
| Wired (Ethernet) | |||
|---|---|---|---|
| Motorcar (DHCP) | Auto (DHCP), manual DNS | Manual | No IP |
| ON - enable. OFF - disable . If this way is enabled, the automatic configuration of the Ethernet network interface is assigned from a server by DHCP protocol. In particular, it is used for automated network settings receiving from the ISP (provider). | The automatic configuration of the Ethernet network interface is obtained by DHCP, excepting the DNS server IP address (i or more than) that is specified manually past the user. | All settings of the network interface (IP address, Mask, Gateway, DNS) are specified manually. | The IP accost is non assigned to the local interface (ability to receive automatic settings by DHCP is forbidden, and previously configured network interface settings (if they were specified) are lost. The option must exist enabled if the PPPoE connectedness is used. |
| PPPoE | |||
| Auto (DHCP) | Auto (DHCP), manual DNS | | |
| ON - enable. OFF - disable. If this mode is enabled, Ethernet network interface settings (IP address, Mask, Gateway, DNS) are assigned automatically; login and password are specified manually by the user. | ON - enable. OFF - disable. IP address, Mask, Gateway are assigned automatically by DHCP; DNS, login, and password are specified manually past the user. | | |
| Wireless (Wi-Fi) | |||
| Auto (DHCP) | Machine (DHCP), manual DNS | Manual | |
| Wireless interface settings (IP address, Mask, Gateway, DNS) are assigned automatically by DHCP. Wireless LAN identifier (SSID), Authentication mode, Encryption type - are assigned automatically (tin can be changed afterward manually), Key or passphrase (wireless LAN password) - is specified manually by the user. | Wireless interface IP address, Mask, Gateway - are assigned automatically; DNS - is specified manually. Westward ireless LAN identifier (SSID), Hallmark fashion, Encryption blazon - are assigned automatically (tin can be changed afterward manually), Key or passphrase (w ireless LAN password) - is specified manually . | The wireless interface IP address, Thousandinquire, Gateway, DNS - are specified manually by the user. SSID, Authentication mode, Encryption blazon - are assigned automatically ( tin can be changed later manually ), Key or passphrase (w ireless LAN countersign) - is specified manually . | |
Network info
To control the status of the STB network connection, the Network info window is used. To bring up the Network info window you, being in the connexion section ( Wired (Ethernet), PPPoE or Wireless (Wi-Fi) ), accept to click the Network info tab (at the lesser of the connection window) or press i (Info) key on RC.
- Current configuration - indicates the type of network settings assignment (DHCP/manual). In the instance of the Wi-Fi connection, in this line, a wireless LAN identifier (SSID) is also indicated.
- Link status - connection status:
- Up - connection is established;
- DOWN - connexion is not established.
- MAC address - physical address (MAC - Media Access Control) of:
- Ethernet network interface - assigned at the factory where STB was manufactured;
- Wireless (Wi-Fi) module (internal) or adapter (external) - assigned by Wi-Fi-device manufacturer .
- IP address - IP address assigned to the networking interface.
- Network mask - subnet mask assigned to the network interface.
- Gateway - IP accost of default network gateway assigned to the network interface.
- DNS server - IP address of the DNS server assigned to the network interface.
This department of Organisation settings contains settings of various servers related to STB (NTP, media-Portal, update).
| Options of level 1 | Options of level two | Descriptions |
|---|---|---|
| General | NTP server (ntpurl)* | NTP server address - encounter Time and date section. |
| | Portal 1 proper name | The first media-portal name. |
| Portal 1 URL (portal1)* | The first media-portal URL. | |
| Portal 2 name | The second media-portal name. | |
| Portal 2 URL (portal2)* | The second media-portal URL. | |
| More (F1) | Open multiportal mode. | |
| More** | Use DHCP portal (use_portal_dhcp)* |
See additional clarification. |
| DHCP portal (portal_dhcp)* | URL of external media-portal that was received from the DHCP server in case the DHCP portal feature is enabled (see Use DHCP portal description). This value is specified in the DHCP configuration file. See additional description. | |
| Bootstrap URL (bootstrap_url)* | Bootstrap file internet accost. Used for debugging. | |
| Update URL (update_url)* | Network location (URL) of imageupdate file :
The range of valid values of <IP accost> for multicast address is specified in RFC 5771 (the valid address range: 224.0.i.0 - 238.255.255.255). |
* - the corresponding value of environs variable is shown in brackets
** - these options are used non for all STB models
Portals
- How to add external portal
- Select a portal for loading
- DHCP portal
In add-on to embedded media-portal STB can operate nether control of external media-portal that uploaded to STB by HTTP network protocol. Addresses of the external portals are ready in Portals window.
In Portals window past default, information technology is possible to specify 2 external portals (proper noun, URL). In addition, the arrangement tin can shop information about more (up to viii) external portals - see Multiportal mode.
Multiportal
manner
In Multiportal mode, rules of loading external media-portal are prepare. A dditional (more than two) external media-portals tin can be specified as well .
To edit settings of multiportal mode:
- Open up Organization settings ⇒ Servers ⇒ Portals ⇒ More (F1);
- Set the choice Multiportal mode to ON.
| Options | Descriptions |
|---|---|
| Multiportal way |
|
| Default portal | Default portal - which automatically loads into the STB (see clarification of Portal load delay option). The user tin can gear up the Embedded or External portal every bit the default portal. The external portal must commencement be configured (come across options Portal N, Use portal, URL N). |
| Portal load delay | Option values:
|
| Portal N | A number (Due north = 1 ... viii) of the current portal whose settings are currently viewed or edited - see options beneath. |
| Use portal N |
If the option is set to ON the portal will exist displayed in Select a portal for loading window (it can be loaded in STB). |
| Name N | Name of current (see Portal North ) portal (o ptional parameter). |
| URL N | URL of current (run across Portal N ) portal (required parameter) in HTTP format. For example http://example.com/stalker_portal/c/index.html |
* - the corresponding value of surroundings variable is shown in brackets
Video
This department of System settings contains settings of STB digital video output that are applied when STB finally loaded (non during booting). Run into particular in the Video output mode and Graphics Resolution section.
| Options of level 1 | Options of level ii | Descriptions |
|---|---|---|
| Video output mode (tvsystem)* | | Defines a set of parameters for displaying video (brandish resolution, scanning type, frame charge per unit, aspect ratio). Default value:
Other values clarification encounter in Video output mode and Graphics Resolution / Supported Video Output Modes (Telly System) |
| Graphic resolution (graphicres)* | | Defines display resolution to "draw" graphics objects (text, images, etc.) on the Idiot box screen. Default value:
Other values clarification run across in Video output style and Graphics Resolution / Graphic Resolution (Graphic Res.) |
| More (F1) | Auto frame charge per unit (auto_framerate)* | Auto frame rate feature is intended to set up required Frame rate value on HDMI video output, depending on video content being played. The r equired Frame charge per unit value is due southelected from one of the pre-indicated variants.
Other values description run into in Video output style and Graphics Resolution / Auto frame rate |
| HDMI/DVI (force_dvi)* | Type of digital video output:
The value should be consistent with a particular type of digital media port used on the TV device. |
* - the corresponding value of environment variable is shown in brackets
Sound
This department of System settings contains sound settings of STB.
| 1 level | ii level | Clarification |
|---|---|---|
| Initial volume (audio_initial_volume)* | | Level (in %) of STB volume when playing media resources (the default is 100%). This pick value is set as first player volume later on every STB reboot. |
| Audio output style (audio_stereo_out_mode)* | | The sound output way of STB. Option values:
|
| More (F1) | Operating Mode (audio_operational_mode)* | Standards (profiles) of dynamic audio stream compression:
|
| SPDIF Mode | Audio output work fashion of the optical SPDIF interface. Selection values:
| |
| HDMI Audio ( audio_hdmi_audio )* | Audio output work mode of the digital HDMI interface. Choice values:
|
* - the corresponding value of environment variable is shown in brackets
Advanced settings
This section of System settings contains boosted settings of STB.
| ane level | 2 level | Descriptions |
|---|---|---|
| Language (language)* | | Option of the required linguistic communication of the Embedded portal for displaying commands and information. The description is given in the Embedded Portal / Localization of user interface / Interface language section. |
| Time zone (timezone_conf)* | | Choice of a fourth dimension zone for time setting in STB. It depends on the country (region) where the STB is used. See as well Embedded Portal / Localization of user interface / Fourth dimension and Date. |
| UPnP client enabled (upnp_conf)* | | Selection of UPnP client mode:
|
| Buffer size, ms (input_buffer_size)* | | Size of the input buffer for media streams. Used to eliminate brusque-time delays during playback. Information technology depends on the type of media traffic, the rate of streaming, etc. |
| HDMI-CEC (cec)* | | Enabling the CEC feature (Consumer Electronics Command) on the HDMI interface. CEC allows users to control both TV and STB with a single remote control unit (Goggle box's RCU). Pick values:
Make sure your Tv supports CEC feature to use it on STB. Run across likewise developer data - CEC-HDMI |
| More than (F1) | Storages admission mode | Sets the access rights to work with the contents of USB storage devices that are connected to STB:
Full access to USB-drives is required for the following functions:
|
| IGMP version (igmp_conf)* | Selecting IGMP protocol version (multicast data transfer control). Used to receive media streams (IPTV channels) in multicast broadcasting mode. IGMP is required to build a Multicast streaming route for service commitment. | |
| Multicast proxy enabled (mc_proxy_enabled)* | Enabling/disabling support of "multicast proxy" mode for specific Wi-Fi router models. Past default, this pick is disabled. For description, see Support for proxy-server UDPXY. The selection should be enabled just if the STB is connected to a Wi-Fi router with proxy server setting enabled (and if such setting is provided on the router). Otherwise, this option should be disabled, since it affects multicast media streams addressing on STB. | |
| Multicast proxy URL (mc_proxy_url)* | The network (IP-) address of Wi-Fi router that supports the multicast proxy mode. For description, run into Support for proxy-server UDPXY. |
* - the corresponding value of environment variable is shown in brackets
Keyboard layout
This section of System settings is used to add/remove required languages back up for STB keyboard ( screen keyboard and external keyboard ).
Note . The list of supported languages depends on an STB software version.
To enable/disable specific language(s) of the keyboard:
- Enter Settings ⇒ Arrangement settings in Embedded portal (or press Setup on RC);
- Select the Keyboad layout choice;
- For required language options set up (past pressing Left or Right on RC):
- ON - language must exist enabled;
- OFF - language must not be enabled.
- Set sequence of switching languages in keyboard (by pressing Vol- or Vol+ on RC);
- Select Save (OK).
Network info
This department of Organisation settings is intended to display the current condition of agile STB network connection. Possible connection types (see Network):
- Wired (Ethernet)
- PPPoE
- Wireless (Wi-Fi)
Instance of Network Info window for Wired (Ethernet) connection (network parameters are the same equally described in the Network info section).
Device info
This section of System settings displays current software and hardware information of STB.
| Model | STB model. |
|---|---|
| Serial number (series#)* | STB serial number (SN). U nique SN values are assigned to every STB at the factory where STB was manufactured. For example:122017N005353 |
| MAC address | MAC (Media Access Control) address of STB wiredEthernet network interface. U nique MAC address values are assigned to every STB at the manufacturing plant where STB was manufactured. MAC address format is: 00:1a:79:<XX:Xx:XX>, where 00:1a:79 - manufacturer (Infomir) code For example: 00:1a:79:51:08:b1 |
| Vendor | Manufacturer of STB (Infomir). |
| Hardware version | A version of the STB system board. Assigned by the manufacturer. |
| Active depository financial institution | Agile bank of flash-retention from which software loading was done (Bank1 / Bank2). See description:
|
| Image version | A version of STB software image (also chosen as master software, firmware). This value is assigned by the STB manufacturer or operator when paradigm creating. |
| Image description | A detailed clarification of the version of STB software. It is formed by the STB manufacturer or operator when image creating. |
| Image date | Date of STB software paradigm creation. |
| Версия RootFS | A version of the RootFS (Root file system) that is a role of the STB software image. |
| JS API version | A version of JS API related to a current build. Encounter STB API. |
* - the corresponding value of environment variable is shown in brackets
Restart portal
This section of Arrangement settings is designed to make a forced (manual) restart of the Embedded portal. Performed subsequently confirmation. This command does not reload the entire STB but Embedded portal application only. It can be used:
- to bring up Select a portal for loading window whereby a new Portal connectedness can be run;
-
to give the upshot newly changed settings (for example, language modify), etc.
Note. Other cases when the portal is restarted: ane) Exit from Primary Menu (if in that location is at least ane External portal); 2) STB power ON or reboot; 3) E xit from deep standby manner.
Reboot device
This section of System settings is designed to commencement software STB rebooting. Performed later confirmation. Information technology can be used for various purposes:
- entering the Bootloader / System Recovery Utility bill of fare;
- restarting STB thespian, etc.
Software restart of STB causes a r estart of the Eastward mbedded portal application besides (see Restart portal).
Reset settings
This department of System settings is designed for making program reset of specific STB settings. Performed afterward confirmation.
After resetting the following STB surroundings variables are reset to initial (factory) value:
- ipaddr_conf (IP address that manually set for wired or Wi-Fi interface) - initial value: discarded to ' 0.0.0.0' ;
- tvsystem - initial value: PAL or NTSC (every bit was ready on the factory) - run across Video output manner and Graphics Resolution);
- aspect_ratio - initial value: Fit on - see Playback;
- linguistic communication - initial value: en (english) - come across Advanced settings (pick Language).
Note. Afterwards programme resetting, the STB does not reboot.
Articulate user data
This section of System settings is designed to clear user settings of STB. Performed after confirmation.
User data refer to detail settings of the Embedded portal and applications of the Embedded portal (encounter list below). User data are stored in a specific memory section of STB. They must not be erased subsequently STB reboot, STB software update or STB mill reset.
Clear user information control deletes the following user settings:
- From Home media section:
- Configuring of access to network resource by SMB and NFS protocols;
- Favorites (list of favorite channels);
- IPTV channels data (playlist);
- Cyberspace browser bookmarks;
- Weather condition data (location);
- Say-so data (credentials) for accessing external portals;
- Authorization data of mail accounts and online services;
- Keyboard layout;
- Additional admission control settings;
- Paired Bluetooth devices;
- etc.
Software update
This section of System settings is intended to carry out transmission update STB software from local storage (USB-bulldoze) or network storage (HTTP server).
| Update method |
|
|---|---|
| URL (update_url)* | URL of t he latest s oftware version of the STB. In the standard software version (factory image) the post-obit update accost is specified (<number of model> - base model number: 250, 254, 256, 270, 322, ...): http://update.infomir.com/mag/<number of model>/imageupdate Case for MAG322: http://update.infomir.com/mag/322/imageupdate Note. For debugging purposes, you tin can change this value once (the value is editable) or permanently with the Update URL option. |
* - the corresponding value of environment variable is shown in brackets
Remote control
This department of System settings is designed to configure the Remote control feature on the STB side. This feature is used to control the STB (that acts every bit a manageable device) from a mobile device (that acts as the command device).
Diverse portable devices (smartphones, tablets, etc.) based on Android and iOS OS are able to act as a command device. Special Magic remote application should be installed on a command device.
| Use remote control |
|
|---|---|
| Device name | An STB name. This name should be entered in the Remote control application on the mobile device. |
| Password (numbers only) | An STB password. This password should exist entered in the Remote control awarding on the mobile device. |
Infomer Set Top Box Password and Login Id
DOWNLOAD HERE
Source: https://wiki.infomir.eu/eng/set-top-box/stb-linux-webkit/embedded-portal/system-settings
Posted by: donaldfortannige.blogspot.com
Comments
Post a Comment